AVK GATE VALVE, PE PIPE ENDS, PN16
Black/blue SDR11 PE100 pipe ends, post indicator plate
![](https://www.avkvn.com/-/media/websites/local-websites/avk-vietnam/images/contacts/pham-quy-trung.png?mw=320&rev=274ce682-996c-4a80-a6d6-080a577bfeca&hash=468DE82CB1BDDFCB3A5A0CD7EE072B76)
Contact
Pham Trung
Technical Manager
Gate valve with PE pipe ends and post indicator plate. For fire protection applications to max. 20° C. Note: The maximum working temperature is set according to the ISO9080 lifetime requirements for PE pipes, and is therefore not the max. temperature for the valve.
AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVK’s own drinking water approved EPDM rubber compound. It features an outstanding durability due to the ability of the rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design. The triple safety stem sealing system, the high strength stem and the thorough corrosion protection safeguard the unmatched reliability.
Variant 36/00-116 | |
---|---|
Connection: | PE Pipe Ends |
Material: | Ductile iron |
DN: | DN80 - DN300 |
PN: | PN 16 |
Closing direction: | Clockwise to Close |
Features
- Fixed, integral wedge nut prevents vibration and ensures durability
- Wedge fully vulcanized with EPDM rubber and equipped with wedge shoes to provide smooth operation
- Wedge and body guide rails ensure stable operation
- Stainless steel stem with wedge stop and rolled threads for high strength
- Stem sealing with an NBR wiper ring, two upper O-rings in a polyamide bearing, one lower O-ring and one O-ring gland seal
- Round EPDM bonnet gasket fixed in a recess
- Countersunk and sealed stainless steel bonnet bolts encircled by the bonnet gasket
- Full bore
- Low operating torque
- Fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901, GSK approved, RAL 5017
- A standard PE pipe is pressed onto the grooved valve end, locked with a steel ring and sealed with a plastic shrink hose. The boltless, full bore PE end connection is tensile resistant and stronger than the PE pipe itself. The PE pipe end enables direct welding into PE pipes resulting in a fast and secure assembly.
Note: The maximum working temperature of 20°C is set according to the ISO9080 lifetime requirements for PE pipes. For higher working temperatures expect a reduction of the PE pipe’s lifetime. Please refer to the local pipe manufacturer for further information
Downloads
AVK_Gate valves_animation_2022.mp4 |
Reference nos. and dimensions:
AVK ref. no. | DN mm |
D mm |
PN Class |
H mm |
H3 mm |
L mm |
L1 mm |
Theoretical weight/kg |
---|---|---|---|---|---|---|---|---|
36-090-00-163 | 80 | 90 | PN16 | 314 | 377 | 900 | 250 | 20 |
36-110-00-163 | 100 | 110 | PN16 | 343 | 418 | 900 | 250 | 30 |
36-180-00-163 | 150 | 180 | PN16 | 446 | 559 | 1100 | 265 | 58 |
36-200-00-163 | 200 | 200 | PN16 | 542 | 669 | 1100 | 255 | 88 |
36-250-00-163 | 250 | 250 | PN16 | 625 | 777 | 1350 | 420 | 118 |
36-315-00-163 | 300 | 315 | PN16 | 701 | 891 | 1350 | 355 | 189 |
Components
1. | Pipe | PE |
2. | Sleeve | Stainless steel |
3. | Shrink hose | Plastic |
4. | Body | Ductile iron GJS-500-7 (GGG-50) |
5. | Wedge | Ductile iron, EPDM encapsulated |
6. | Wedge nut | Brass DZR CW626N |
7. | Bonnet gasket | EPDM rubber |
8. | Bonnet bolt | Stainless steel A2, sealed with hot melt |
9. | Bonnet | Ductile iron GJS-500-7 (GGG-50) |
10. | Stem seal O-ring | EPDM rubber |
11. | Thrust collar | Brass DZR CW602N |
12. | O-ring | NBR rubber |
13. | Bearing | Polyamide |
14. | Wiper ring | NBR rubber |
15. | Stem | Stainless steel 1.4104 (430F) |
16. | O-ring | NBR rubber |
17. | Post indicator plate | Ductile iron GJS-400-15 |
18. | Bolt | Stainless steel |
19. | Wrench nut | Cast iron GJL-250 (GG-25) |
20. | Washer | Stainless steel |
21. | Bolt | Stainless steel |
Test/Approvals
- Hydraulic test according to EN 1074-1 and -2 / EN 12266 |
- Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar). Operation torque test
Standards
- EN 1074 part 1 & 2, EN 1171